The Genny can be used to apply a distinctive signal that the C.A.T can detect. The Radiodetection C.A.T 3 and Genny 3 has become the industry standard pipe and cable avoidance tool, recognized as the leader across all industry segments providing performance, ruggedness and reliability, together with affordability and low cost of ownership.
Applying the Trace Signal
Direct Connection
A very effective method for connecting to a valve, meter, junction box or other access point. Curly leads are compact and easier to handle and pack away.
Induction
A convenient and quick way of applying the Genny3 signal to pipe or cable, where direct connection or signal clamping is not possible.
Flexitrace (Optional)
A self-contained flexible rod and transmitter alternative for tracing non-metallic pipes. Energized by connecting to the Genny3. The small diameter transmitting head allows access to very small diameter pipes of 15mm or above.
Mouse (Optional)
The mouse is a self-contained transmitter which is connected to a push rod and inserted into a non-metallic pipe or duct structure. The mouse can then be detected using the C.A.T3.
Signal clamping (Optional)
Applies a Genny3 signal safely to a pipe or live cable up to 76mm diameter without interrupting the supply.
Live cable connectors (Optional)
For applying the transmitter signal to a live cable, the most certain method of locating a power distribution system in a street.
Note:
All CAT3 and Genny3 products are Network Railtrack Approved.
Downloads:
Radiodetection CAT 3 Brochure
